PEMF Technology Comparison Chart

PEMF Technology Comparison Chart

PEMF Technology Comparison Chart

Mats, Beds, Chairs & PODs

MATS, BEDS, CHAIRS & PODS, basically consist of a collection of flat-round, or coiled, electro-magnets. These magnets are pulsed “ON then OFF” at various rates.  Most of these can be electronically set to pulse at different pulse rate settings.  There is absolutely no similarity to naturally emitted frequency harmonics of living matter to any pulsed magnet.  more…

continued… Mats, Beds, Chairs & Pods

continued… MATS, BEDS, CHAIRS & PODS, Pulsing of magnets, or even an electromagnetic field, is not achieving anything other than setting a pulse rate.  It should be stressed that these, or any pulse rates, are not frequencies. And, even if we chose to refer to them with any association with the word frequency, more appropriately it would be termed to be a frequency rate.   more…

continued… Mats, Beds, Chairs & Pods (s3)

continued… MATS, BEDS, CHAIRS & PODS,  Pulsing of magnets, or even electromagnetic fields, are strictly in every sense, merely just pulsing electro-magnets at various gauss strengths. It is such a stretch to consider this type of technology a true PEMF.  Marketing and avoidance of government regulation has encouraged this confusion.  

Units With Coils or Loops

UNITS WITH COILS or LOOPS Are all variations of the original Pap-Imi developed by Dr. Pappas, a Greek mathematician.  He believed his Unified Theory of the Human Body so developed his technology based on this.   more…

continued… Units with Coils or Loops (s2)

continued…   UNITS WITH COILS or LOOPS, Dr. Pappas’ theory was rejected by mainstream science due to lack of supportive evidence, negative regulatory scrutiny, potential side effects, and misleading claims.   more…

continued… Units with Coils or Loops (s3)

continued… UNITS WITH COILS or LOOPS,  Rejection of the Unified Theory of the Human Body resulted removal from all marketing, but sales continued.  The problem…  Without his theory being correct, nothing about the corresponding technologies makes sense.  Devices like these are nothing more than Pap-Imi knockoffs.   more…

continued…Units with Coils or Loops (s4)

UNITS WITH COILS or LOOPS… continued  The base technology of the original PAP-Imi device is the same, but their housings and attachments may look a bit different.  These have been bolstered into wellness industry therapy using amazingly outrageous marketing claims.  …more

continued…Units with Coils or Loops (s5)

UNITS WITH COILS or LOOPS… continued  The way these devices work is to run as much voltage as the insulation will handle through the loops, coils, or other attachment tool, which through induction, make the muscles twitch.  more…

continued…Units with Coils or Loops (s6)

UNITS WITH COILS or LOOPS… continued  Some like to refer to the jolts and muscle twitching as “cellular exercise”.  Others consider this an ambient form of TENS therapy.  Basically, think off sitting under high-tension power lines for an hour, or so…That’s a HARD PASS!.

Frequency Specific Technologies

FREQUENCY SPECIFIC TECHNOLOGIES, includes the various device technologies whose inventors claim they can both “read your frequencies“, condition these and “treat you with conditioned frequencies you require” utilizing many different attachment tools for tactile delivery.  Or, technologies that provide several specific settings claimed to re-program your cellular frequencies, feed those frequencies and correct what ever ails you.  (Please read “What Are Frequencies” below)  more…

 

continued… Frequency Specific Technologies (s2)

continued…FREQUENCY SPECIFIC TECHNOLOGIES,  Frequencies from atoms can be read out 5 to 8 decimal places.  This is measured precisely by mathematical equations.  Why?  Because the equipment needed to have the precision to measure down this small, has not been invented and therefore is not available.  In addition, there are no devices capable of emitting biological frequencies, or the robust harmonics of frequencies with the necessary precision, either.

 

Ambient Emitting Frequency Systems

AMBIENT EMITTING FREQUENCY SYSTEMS will either consist of a small Tesla Coil in the center of a ring of vertical tubes filled with various gases, or another form may consist of glass bulbs filled with a noble gas that is bombarded by high voltage spark emission.  These ambiently broadcast the frequencies contained in the noble gas or gases that are being bombarded, this type of system is analog.  The issue with these can be the gases that the tubes or bulbs are filled with.  There have been cases of Mercury, Bromine and Cadmium, etc. used to generate color spectrums.  Unfortunately, who wants to resonate with any of those?

                                                                                                                                                                                                             continued>

Ambient Emitting Frequency Systems… Continued

Ambient Emitting Frequency Systems… continued 

There are devices being marketed and claiming to have harnessed “Scalar Energy”. Marketing for these claims Scalar to be a healing energy.  However, Scalar has its own physical properties, and the science of Scalar does not match the marketing.  Nor does sitting in a room with television screens circling a user, create Scalar. Deceptive marketing has created the misconception that Scalar Waves are real.  A Scalar Potential, however, that has both scientific and physics to substantiate its being real and no longer theoretical. 

 

                                                                                                         continued>

Ambient Emitting Frequency Systems… Continued (s3)

Ambient Emitting Frequency Systems… continued 

In the past decade, many of these companies have bypassed the Tesla coil spark gap components as being anything other than decorative.  In recent years solid state controls generate the pulse rates and are the basis of the frequencies claimed to be emitted to the users.  These are not actually emitting frequencies, as in biological frequencies.  These are digitally derived pulse rates.

Human Energy Field’s Robust Natural Frequencies ARE NOT Digital.  more…

 

                                                                                   

Tesla’s Healing Energy Device circa 1897

TESLA’S HEALING ENERGY DEVICE circa 1897… Nikola Tesla had developed a number of different devices during the late 1800’s.  His goal was to create a device that could “charge” an entire room of people.  The closest he got was a device that had a side effect, it created Rontgen Waves, now referred to as “radiation”.  After some people got sick and burned, that concept was shelved, and he moved on.  What is really interesting about this period in Tesla’s work, is that a number of devices today that are being produced, marketed and sold, were originally developed by Tesla.  He determined these didn’t work and moved on in his research.  The device he settled on, sold and kept for his own use, was his “Human Energy Machine“.  

                                                                                                                                                                                         continued>

Tesla’s Healing Energy Device circa 1897… Continued

Tesla’s Healing Energy Device circa 1897… continued 

Nikola Tesla’s “ consisted of a glass ball (about the size of a volleyball, filled with a specific gas) that the person held onto and a glass plate that had a conductive material under it which the person using placed their feet on. It of course plugged into A/C power.  There were a few other items involved but this is the gist. There are pictures on the internet of Mark Twain holding the glass bulb, as he was a great fan of this device which should not be confused with the Multi-Wave Oscillator, another Tesla creation. Tesla’s theory was to raise the energy level of the body which would help the body to heal then naturally.  This is a massive over-simplification, and did Tesla know all the physics involved?  Probably.  Did he understand scalar physics?  Probably not.  But then, the real question is, was Tesla really from around here? 

 

DEVICE TYPE
ENERGETIC FITNESS SYSTEMS ANALOG PEMF
MATS, BEDS, CHAIRS, PODS,
UNITS w/ LOOPS AND COILS
FREQUENCY SPECIFIC
LIGHT OR SOUND FREQEUNCY EMITTERS
Demo Image
Mats, Beds, Chairs, Loops, Pods
Add New
PAP-imi Copies
Add New
Frequency Specific
Add New
Light or Sound Frequency Emitters
PEMF
ANALOG
DIGITAL
HIGH INDUCTION
FREQUENCY SPECIFIC
ELECTROMAGNETIC
INCLUDES SPARK GAP
PLASMA COMPONENT
SETS UP SCALAR POTENTIAL
PULSED MAGNETS AND COILS
AMBIENT EMITTED FREQUENCIES
PAP-imi CLONES
TESLA HEALING ENERGY MACHINE  circa 1897

 

To fully comprehend and differentiate the vast differences between wellness devices seen in spas, clinics, fitness centers, and even our homes, can be quite daunting.  If you find this overwhelming at times, know that you are not alone in this.  Even seasoned bioenergetic research professionals admit to finding themselves stumped when discerning just what they are looking at.  Add to this, the overwhelming bombardment of claims, studies and marketing coming at all of us on social media, in documentaries and here on the web. 

Our focus will be to identify and explain “What PEMF IS vs. What PEMF IS NOT“.  Rather than disparaging other technology developers, our take is to share with you how we discern what a technology actually is, its origins and the concept that created it along with whether it is based on true science and physics, or not.  We receive so many questions from our followers, customers and colleagues trying hard to discern what they are being told. Hopefully, this will support your own exploration into how to bolster bioenergy in yourself, loved ones or those you professionally support in your workplace, or home.  

 

PEMF Technology Comparison Chart is based on the following key metrics:  



General Definition: The rate at which a vibration occurs that constitutes a wave, either in a material or in an electromagnetic field, usually measured per second1.

Scientific Definition: The number of occurrences of a repeating event per unit of time. It is most often measured in hertz (Hz), which is the number of cycles per second2

Applications: Frequency is an important parameter in science and engineering to specify the rate of oscillatory and vibratory phenomena, such as mechanical vibrations, audio signals, radio waves, and light2.

 

Analog & Digital Waveforms

 

Living Matter Does Not Emit Digital Frequencies…

Analog Frequency EmissionBiologic Frequencies: Frequencies in the human body, and all living matter, start at an atomic level.  Cellular frequencies are a harmonic resonance of all the atoms contained within that cell.  These biologic frequencies Are All Analog, not digital.  Any living matter frequency emissions are Analog.  These are robust and can be mathematically measured out 5 to 8 decimal places.

Naturally occurring Analog Harmonic Frequency Emissions ebb and flow in intensity and duration… 

 

Digital Frequencies:    Digital frequency refers to the rate at which a digital signal repeats itself. In digital electronics, this is often represented by the formula:

f=t1​

where ( f ) is the frequency and ( t ) is the period of the signal1.

 

Digital frequencies cannot be applied as robust as the Analog frequency readings they attempt to mimic.  Currently, there is no existing DIGITAL FREQUENCY generating technology capable of imposing anything but a dominant guestimate of a mimicked abbreviated version of a few frequencies, that cannot rival the harmonic output of living matter.

Basically, digital frequencies are signals that are turned on and off.  There isn’t a consistent signal, it is a step signal.                            





An electromagnetic wave is a waveform that consists of oscillating electric and magnetic fields, which are perpendicular to each other and to the direction of wave propagation1. These waves are created by the acceleration of charged particles and can travel through a vacuum at the speed of light1 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



Digital frequency refers to the rate at which a digital signal repeats itself. In digital electronics, this is often represented by the formula:

f=t1​

where ( f ) is the frequency and ( t ) is the period of the signal1.

Basically, digital frequencies are signals that are turned on and off.  There isn’t a consistent signal, it is a step signal. 

The bottom illustration is a digital frequency

        www.crutchfield.com

A/C power has a pulse rate of 60 Hertz in the US, 50 Hertz in Europe and there are voltage differences in several countries that also have an impact on PEMF outputs.  So, if we accept that the pulse rate of A/C current is the P in PEMF, then anything attached to it for a power source could be argued as a PEMF technology.  With this line of thought, then devices like electric blankets are PEMF cocoons… High tension powerlines are PEMF ambient field generators…  And, our breaker box or the smart meter our electricity comes into our living spaces are also PEMF…  Right?

Ask yourself if the PEMF you might be considering provides a healthy field that will not weaken your own.  



A Scalar potential requires two opposing 3-space, EM waves, one being a longitudinal EM waveform and the other being a time polarized EM wave.  When these two EM waveforms meet, they create a Scalar Potential. 

The unique properties of Scalar include:  1) It is not bound by the speed of light (it is instantaneous, which is why it is being considered for space communications);  2) It will spread to every particle within its domain, and;  3) It will “pick-up” and/or “carry” the signal of every particle within the space of the potential (this is referred to as a conditioned potential). 

In the case of the EFS, the area of the conditioned potential is every particle (atom) within the human body, or the body dielectric. 

It must be noted that there is no such thing as a scalar wave, and scalar field, or potential, cannot be created by using TV sets, Crystals, and anything other than 2 opposing EM waves.







Many “Electro-therapeutic” technologies claiming to be PEMF adopted this classification to bypass governmental scrutiny.  And many claiming to have FDA Approval have only passed FDA Clearance. This is a requirement for those importing into the US.  FDA Clearance does not mean that the efficacy of the PEMF equipment has been tested in any way and does not mean that the PEMF equipment in question carries an FDA Approval. 

PEMF has even changed its acronym meaning over the years with the “F” standing for Frequencies early on, and then suddenly PEMF Marketing began referring to the “F” as standing for Fields. 

We recommend that if you are assessing the validity of a PEMF technology, take a very close look at the elements of its makeup.  These are listed out in the comparison chart for each type of technology claiming to be a PEMF.

We invite you to watch the following videos about PEMF: 

If you have any questions, please feel free to Contact Us.