– … Not the PEMF!

By redefining the Energetic Fitness System in order to better explain the technology, we hope to garner interest by researchers, users, and potential future partners in our venture.

 

For years many have classified the Energetic Fitness System as a PEMF or Pulsed electromagnetic field device and on some level that may be true, but that similarity would be like saying that a $250,000 McLaren and a $250 Radio Control car are both cars.  Sure they both have wheels and both should go if you push the accelerator, but the similarity ends there. 

The Energetic Fitness System may be similar to a PEMF in that both use electromagnetic frequency fields, but the similarity ends there.

A more accurate description of the Energetic Fitness System would be a High-Static Electromagnetic Field (for this post will describe as a HS-EMF) device – using an Electromagnetic Frequency Field with a Bio-Compatible High-Static delivery system technology.  In addition the Electromagnetic Frequency Field frequencies are analog and create frequency patterns that are different for each person, and seem to change over time.  These frequencies are not “programmed” by a digital computer or frequency generator and then forced upon the human system, as if each individual were exactly the same.  The uniqueness of each person’s frequency pattern suggests that the individual is actually part of the tuning process.

In order to explain this in detail we first need to explain what a PEMF device actually is.  There are so many websites trying to sell various devices and technologies and it seems that each has their own definition of what a PEMF actually is.  Their descriptions of a PEMF all seem to be specific to the unit that they manufacture or sell. 

Again let’s go back to the cars.  McLaren may define a car as a luxury vehicle that can take you in style anywhere you want to go at 180 mph.  While Toyota may describe a car as a vehicle that can get to anywhere you want to go with 50 mpg.  Notice there is really only one letter difference; the “H” and the “G”, but the difference in price is about $200,000.

After a lot of searching, the best description we could find of a PEMF was on Wikipedia.

The following information is from the Wikipedia Website

Definition of PEMF or Pulsed Electromagnetic Field – Pulsed electromagnetic field therapy (PEMFT), also called pulsed magnetic therapy, pulse magnetotherapy, or PEMF, is a reparative technique most commonly used in the field of orthopedics for the treatment of non-union fractures, failed fusions, congenital pseudarthrosis and depression. In the case of bone healing, PEMF uses electrical energy to direct a series of magnetic pulses through injured tissue whereby each magnetic pulse induces a tiny electrical signal that stimulates cellular repair. Many studies have also demonstrated the effectiveness of PEMF in healing soft-tissue wounds; suppressing inflammatory responses at the cell membrane level to alleviate pain, and increasing range of motion. The value of pulsed electromagnetic field therapy has been shown to cover a wide range of conditions, with well documented trials carried out by hospitals, rheumatologists, physiotherapists and neurologists. There are several electrical stimulation therapy devices, approved by the FDA, that are widely available to patients for use. These devices provide an additive solution that aid in bone growth repair and depression.[1][2]        

History of PEMF – The use of magnetic field therapy in clinical applications dates back over 500 years. In the 15th century, Swiss physician and alchemist Paracelsus used lodestones, or naturally magnetized pieces of the mineral magnetite, to treat conditions such as epilepsy, diarrhea, and hemorrhage. He believed that the ability of magnets to attract iron could be replicated by attracting disease away from the body. In the late 18th century, the Austrian physician Franz Anton Mesmer, who originated the idea of “animal magnetism”, described the healing properties of passing magnets over the open veins of patients.[3] In the mid-19th century, magnetic ointments produced in New York were introduced as remedies for a whole spectrum of illnesses such as headaches, inflammation of the bowels, burns, fever sores, rheumatism, gout, and toothache.

Although electricity’s potential to aid bone healing was reported as early as 1841, it was not until the mid-1950s that scientists seriously studied the subject. Fukada’s and Yasuda’s discovery of the electric potential of bone provides evidence of electricity’s effect in promoting osteogenesis (bone growth), particularly in long bone non-unions.[4] During the 1970s, Bassett and his team introduced a new approach for the treatment of delayed fractures, a technique that employed a very specific biphasic low frequency signal [5][6][7][8] to be applied for non-union/delayed fractures. The use of electrical stimulation in the lumbosacral region was first attempted by Alan Dwyer of Australia. In 1974, he reported successful initiation of graft incorporation in 11 of 12 fusion patients. Since that time, electrical stimulation has been shown to significantly increase the probability of bony arthrodesis in spinal fusions.[9][10]

In 1979 the FDA approved non-invasive devices using pulsed electromagnetic fields designed to stimulate bone growth.[11]

In 2004, pulsed electromagnetic field system was approved by FDA as an adjunct to cervical fusion surgery in patients at high risk for non-fusion.[12]

The use of PEMF stimulation has been found to be safe.[13] It has also been proven safe and effective in treatment of delayed union in long bone fractures and patients at a risk of non-union following spinal fusion surgeries.

 

Description of a High-Static Electromagnetic Field (HS-EMF) – is a technology that uses an Electromagnetic Frequency Field with a Bio-Compatible High-Static Delivery System Technologies.

In order to more easily explain a HS-EMF technology, we first will explain the differences between PEMF and a HS-EMF.  In order to explain the differences, the actual workings of the PEMF technology will be described.

Any of the mainstream PEMF technologies create their frequencies using a computer frequency generator that can regulate both the frequencies and the pulse rates.  The frequencies created are both specific in modulation and in range, i.e. the frequencies are limited to specific frequencies – 24 Hz, or for higher quality units, 24.35 Hz.  Either way, the output is limited to a specific Hertz. The way many technologies try to overcome this fault is to “cycle” through series of frequencies in order to attempt and duplicate the frequencies of the human body.

The primary flaw in this concept is that the body’s cells (the parts of the body that supposedly being influenced by these frequencies) are not specific frequencies.  The human body is made of atoms1 and each atom has a specific frequency2.  If several different atoms are combined to create a molecule, there is a combination of specific frequencies, and if a number of molecules are combined to create the mitochondria of a cell, again a combination, or resonance frequency, is formed.  Now combine all the various parts of a single cell; you definitely don’t end up with a single, specific frequency that only goes out 2 decimal places, and harmonic resonance of a single sell is not digital.

A second problem is that most PEMF units the same is the delivery system.  Nearly all use an antenna or antenna array to deliver an ambient frequency broadcast, but there are a few that try to use low voltage, direct contact.  The major problem with an antenna type delivery system is the penetration of electromagnetic frequencies into the human body.  ULF ( ultra low frequencies below 3 Hz) can penetrate nearly anything, so getting those frequencies into, say deep bone structure would be easy, but using ELF (frequencies ranging from 3 to 300 Hz) may not be able to penetrate as deep and in the higher ranges may only penetrate the skin. 

Most units used today compensate for this by “turning up” the amplitude, or volume.  This can aid in tissue penetration to a point, but you are also increasing the possibility for adverse reactions.  Unfortunately, this may be the only part of western allopathic medicine that the alternative medical field has adopted; if something doesn’t seem to work, up the dose, or in this case up the volume.

A HS-EMF technology is a totally unique system that conquers both of these deficits. A true HS-EMF creates harmonic frequency patterns that are analog are and different for each person. These frequencies are not “programmed” by a digital computer or frequency generator and then forced upon the human system, as if each individual were exactly the same.  The uniqueness of each person’s frequency pattern suggests that the individual is actually part of the HS-EMF tuning process.  These indications cannot be overstated.

In addition, the unique Bio-Compatible Static delivery system is capable of delivering the frequency patterns throughout the body.  A HS-EMF is not an antenna broadcast system, but is a contact system that enables this direct delivery.  No more broadcasting a series of fluctuating frequencies that may, or may not, have any positive effect on the human system. 

A HS-EMF system is a combination of these two developments and could be the most important breakthrough in the Alternative Medical Device field to date and could provide the basis for many different applications in many different fields.

The Energetic Fitness System™ technology, although designated as a PEMF, is a true HS-EMF and a major innovation derived from a very old technology, originally conceptualized by Nikola Tesla around 1897.  Tesla’s theory was that it would be possible, via a unique resonance-frequency static field, to infuse bio-compatible energy into the human body energetically balancing the individual’s energetic system and that by so doing allow the body to function optimally.

The desire is to reinforce the frequency harmonics of the body’s individual cells thereby raising the energy levels of those cells.  Increased energy levels can improve individual cellular functions, which in turn may alleviate stress on bodily systems, which in turn can optimize the performance of the whole being.

At the same time, the initial research seems to point towards a “turning on” or “turning up” of the cells.  The energetic level, or field, of the body has been shown to expand during the 25 minutes of EFS use and will continue to expand even after the individual shuts off the EFS unit.  The average expansion seems to be about 8.4 times (840%)3,4 during the initial usage.  These fields have shown that after the EFS unit has been shut off, they then continue to expand an additional 10% over the next 30 minutes.  The field then remains stable for up to four hours before beginning to taper off.   The expanded field affects also appear to be accumulative with regular use. 

  

References:

 

  1.  education.jlab.org  – According to Jefferson Lab (education.jlab.org), an average 70 Kg person, that’s about 150 lbs, will have approximately 7*10 to the 27th atoms in their body. That’s 7 followed by 27 zeros (7,000,000,000,000,000,000,000,000,000).
  2. https://www.setileague.org/askdr/hydrogen.htm – The hydrogen line (1420.40575 MHz) is the precession frequency of neutral hydrogen atoms, the most abundant substance in space.
  3. PRELIMINARY ANALYSES OF THE EFECTS OF THE EFS ON THE HUMAN ENERGY FIELD By Wallace G. Heath, Ph.D.
  4. Magnetic FieldsPreliminarily, the research team observed that the magnetic field readings, with the EFS turned on and an individual engaged were not consistent with standard laws in relation to magnetic fields.

 

 

Print Friendly, PDF & Email
Spread the love
Bookmark the permalink.

Comments are closed.